Glacier 35-Slot Stackable Keycap & Switch Display Tray
Description
Description
The Glacier Stackable Display Tray gives your keycap and switch collection a proper home. Each tray has 35 slots in a 7 × 5 grid, spaced 25 mm apart so chunky artisan keycaps don't crowd each other. MX-style switches clip into the slots like a keyboard plate and your keycaps press on top, so every key sits the way it does on a keyboard.
Need more room? Add removable legs. Four legs push into the corner holes of one tray, and the next tray sits on top with its corner pins dropping into the legs. Each level adds 57 mm, with room for keycaps up to 38 mm tall underneath. Every tray is the same, so start with one and stack more later. A tray lifts straight off and the legs stay standing.
The tray is 3D printed in white tough PLA, 199 × 149 × 12 mm, with a ribbed underside so the plate doesn't flex when you press a switch in. It sits flat on a desk or shelf with switches installed. It fits MX-style switches, box-style included, with 3 or 5 pins. It does not fit low-profile, Alps or Topre switches.
Every order is printed on demand just for you, so delivery takes about 5–7 business days. Keep it away from high heat, since PLA can soften in a hot car or by a heater. Note: switches and keycaps are not included.
Included in The Box
Included in The Box
- 1 Tray: 1 display tray
- Add-On Level (Tray + 4 Legs): 1 display tray and 4 legs, to stack on a tray you have
- 2-Level Stack: 2 display trays and 4 legs
- 3-Level Stack: 3 display trays and 8 legs
- 35-Slot Display – a 7 × 5 grid for your switches and keycaps
- Roomy 25 mm Spacing – chunky artisan keycaps don't crowd each other
- Switches Clip In – MX-style switches snap into the plate like a keyboard
- Keycaps Sit on Top – press keycaps onto the switches, just like on a keyboard
- Stackable – removable legs turn any tray into another level
- Easy to Stack – push 4 legs into the corner holes and set the next tray on top
- Lifts Straight Off – take a tray off and the legs stay standing
- Room for Tall Keys – keycaps up to 38 mm tall fit under the next tray
- Grow Your Collection – every tray is the same, so add an Add-On Level any time
- Sits Flat – a low 12 mm tray for a desk or shelf, even with switches in
- Ribbed Underside – the plate stays stiff when you press a switch in
- Tough PLA – strong, durable white plastic
- Printed on Demand – each order is made for you; delivery takes about 5–7 business days
- Collector Gift – a display for keyboard fans to show off their keys
| Specification | Details |
|---|---|
| Product | Stackable keycap and switch display tray |
| Options | 1 Tray, Add-On Level (Tray + 4 Legs), 2-Level Stack, 3-Level Stack |
| Slots | 35 per tray (7 × 5), 25 mm apart |
| Tray Size | 199 × 149 × 12 mm (7.8 × 5.9 × 0.5 in) |
| Level Height | 57 mm (2.2 in) per level with legs |
| Key Clearance | Keycaps up to 38 mm (1.5 in) tall under the next tray |
| Material | Tough PLA, 3D printed |
| Color | White |
| Weight | About 103 g (3.6 oz) per tray; 14 g per set of 4 legs |
| Production | Printed on demand; delivery takes about 5–7 business days |
| Compatibility | MX-style switches, box-style included, 3-pin or 5-pin |
| Not Compatible | Low-profile, Alps and Topre switches |
| Not Included | Switches and keycaps |
| Care | Keep away from high heat (hot cars, heaters) |