Glacier Butter Stick 3D Printed Artisan Spacebar Keycap, 6.25u
Description
Description
The Glacier Butter Stick Spacebar is a 3D printed artisan spacebar keycap shaped like a stick of salted butter, with lettering laid out like a butter wrapper: "4oz." over "NET WT. (113 G)" at the left, and "SALTED BUTTER" right of center. Choose Yellow with blue letters, Blue with black letters, or Green with blue letters. Flat on top with rounded edges, it stands 16 mm tall, about 7 mm taller than a typical spacebar.
It's multi-color 3D printed in fine 0.12 mm layers: tough PLA on the Yellow and Blue, a PLA stick with tough PLA letters on the Green. It prints upside down, so the top comes off the textured build plate with a fine, even matte finish. The letters are their own plastic set flush into the top, not paint, so they won't peel or rub off. It looks soft, but it's rigid plastic and doesn't squish.
It's a standard 6.25u spacebar (117.8 × 17.8 mm) for MX-style switches, box-style included. Its two stabilizer stems sit 100 mm apart for plate- or PCB-mount stabilizers with + stems. It doesn't fit wire-clip stabilizers, 6u, 6.5u, 7u or split spacebars, or low-profile switches.
Every order is printed on demand just for you, so delivery takes about 5–7 business days. To swap it in, pull the old spacebar straight up, line up the three + stems and press down evenly. Keep it away from high heat, since PLA can soften in a hot car or by a heater. Note: sold as a single spacebar keycap; keyboard not included.
Included in The Box
Included in The Box
- Spacebar: 1 Butter Stick artisan spacebar keycap, 6.25u, in the color you choose
- Butter Stick Design – a spacebar shaped like a stick of salted butter
- Three Colors – Yellow with blue letters, Blue with black letters, or Green with blue letters
- Wrapper Lettering – "4oz.", "NET WT. (113 G)" and "SALTED BUTTER" on top
- Made to Stand Out – 16 mm tall, about 7 mm taller than a typical spacebar
- 3D Printed Artisan Spacebar – a sculpted novelty spacebar for your mechanical keyboard
- Colors Printed In – the letters are their own plastic, set flush, so nothing peels or rubs off
- Matte Textured Top – printed upside down, so the top takes the build plate's fine, even finish
- Rigid PLA – durable plastic that looks soft but doesn't squish
- Standard 6.25u Size – 117.8 × 17.8 mm, for the usual 6.25u spacebar spot
- Fits MX-Style Switches – box-style too, on hot-swap or soldered keyboards
- Stabilizer Ready – stems 100 mm apart for plate- or PCB-mount stabilizers with + stems
- Easy Swap – pull the old spacebar, line up the three + stems and press down
- Printed on Demand – each order is made for you; delivery takes about 5–7 business days
- Fun Gift – a playful upgrade for keyboard fans
| Specification | Details |
|---|---|
| Product | 3D printed artisan spacebar keycap |
| Design | Butter stick with "4oz.", "NET WT. (113 G)" and "SALTED BUTTER" lettering |
| Size | 6.25u, 117.8 × 17.8 mm (4.64 × 0.70 in) |
| Height | 16 mm (0.63 in) |
| Material | Yellow and Blue: tough PLA; Green: PLA stick with tough PLA letters |
| Colors | Yellow with blue letters; Blue with black letters; Green with blue letters |
| Printing | Multi-color 3D printing, 0.12 mm layers, printed upside down for a matte textured top |
| Weight | About 17 g (0.6 oz) |
| Stem | MX-style (+) split stem on a round post |
| Stabilizers | Stems 100 mm apart for plate- or PCB-mount stabilizers with + stems |
| Compatibility | MX-style switches, box-style included, on keyboards with a 6.25u spacebar |
| Not Compatible | Wire-clip stabilizers; 6u, 6.5u, 7u or split spacebars; low-profile switches |
| Production | Printed on demand; delivery takes about 5–7 business days |
| Care | Keep away from high heat (hot cars, heaters) |