Glacier Literal Navigation Keycaps: 3D Printed Artisan Keycaps (Ins, Home, PgUp, Del, End, PgDn)
Description
Description
The Glacier Literal Navigation Keycaps are six funny 3D printed artisan keycaps that take your navigation keys at their word. Insert is a plug pushed into a wall outlet, Home is a little house with a red roof and chimney, Page Up is a book with its pages turning up, Delete is a trash can full of crumpled paper, End is a finish line, and Page Down is a book left face down.
Every key is multi-color 3D printed, one fine 0.12 mm layer at a time, and printed solid with 100% infill. The keys are tough PLA, and every color is its own plastic, not paint, so it won't peel or rub off. Fine layer lines are part of the 3D printed look, and a split + stem grips the switch snugly.
The keycaps fit MX-style switch stems, box-style switches included, on most hot-swap and soldered mechanical keyboards. Each has a standard 1u base (17.8 × 17.8 mm) and stands 30 mm tall (Page Up 23.1 mm), so they stand out in your navigation cluster. They do not fit low-profile switches.
Every order is printed on demand just for you, so delivery takes about 5–7 business days. Get all six or pick a single key, then pull the old keycap straight up, line up the +, and press it on. Keep your keycaps away from high heat, since PLA can soften in a hot car or next to a heater. Note: sold as keycaps only; keyboard not included.
Included in The Box
Included in The Box
- Navigation Pack: 6 artisan keycaps (Insert, Home, Page Up, Delete, End, Page Down)
- Single key: 1 artisan keycap of your choice
- Six Literal Navigation Keys – Insert, Home, Page Up, Delete, End and Page Down, each shown as what it says
- Set or Single Keys – get all six keycaps or choose just the one you love
- Printed on Demand – each order is made for you; delivery takes about 5–7 business days
- 3D Printed Artisan Keycaps – sculpted novelty keys that make your keyboard stand out
- Key Names on the Front – Ins, Home, PgUp, Del, End and PgDn in white on each black key
- Colors Printed In – each color is its own plastic, so nothing peels or rubs off like paint
- Tough PLA – strong, durable plastic made for everyday typing
- Printed Solid in Fine Layers – 100% infill and 0.12 mm layers for sturdy keys with crisp detail
- Snug Split Stem – the + stem grips the switch so the keycap stays put
- Fits MX-Style Switches – box-style too, on most hot-swap and soldered mechanical keyboards
- Standard 1u Size – 17.8 × 17.8 mm base fits the navigation cluster or any 1u key spot
- Made to Stand Out – 30 mm tall (Page Up 23.1 mm), and no figure reaches over the next key
- Easy to Install – pull the old keycap, line up the +, press down
- Fun Gift – a clever upgrade for gamers, coders and keyboard fans
| Specification | Details |
|---|---|
| Product | 3D printed artisan keycaps |
| Designs | Insert (plug in an outlet), Home (house), Page Up (pages turning up), Delete (trash can), End (finish line), Page Down (book face down) |
| Options | Navigation Pack (6 keys) or single keys |
| Production | Printed on demand; delivery takes about 5–7 business days |
| Material | PLA: tough PLA key body and figures, red PLA details |
| Colors | Black base with a white key name, white and red figures |
| Printing | Multi-color 3D printing, 0.12 mm layers, 100% infill |
| Size | 1u, 17.8 × 17.8 mm base |
| Height | 30 mm; Page Up 23.1 mm |
| Stem | MX-style (+) split stem on a round 5.5 mm post |
| Compatibility | MX-style switches, box-style included, on hot-swap or soldered keyboards |
| Not Compatible | Low-profile switches |
| Best Position | Insert, Home, Page Up, Delete, End and Page Down, or any 1u key |
| Care | Keep away from high heat (hot cars, heaters) |